Loading... Please wait...
Image 1
  • Image 1

SPI FSP180-50PLAR 180W Flex ATX12V Active PFC

Price:
 $59.33
MPN:
 FSP180-50PLAR
Brand:
UPC:
 677808610221
Condition:
 NEW
Availability: Ships in 2 business days
Ships in 2 business days
Shipping:
 Calculated at checkout


Sorry but this item is currently unavailable.

Please check back at a later stage.

Add to Wishlist

Click the button below to add the SPI FSP180-50PLAR 180W Flex ATX12V Active PFC to your wish list.

SHARE
Pin It

Product Description

AC Input - 90V - 265V
Dimensions WxDxH - 81.5 x 150 x 40.5mm
Fan Features - 4 cm Fan
Form Factor - Flex ATX
MTBF - 100,000 Hours
Output Power - 180 W

Features:
Complied with Flex ATX and ATX12V standard
Active Power Factor Correction (PFC) meet EN61000-3-2
High efficiency and reliability
Remote ON/OFF function
Internal 12V DC fan included
Noise Killer (thermal fan speed control function)
Low noise and ripple
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE
Input Characteristics :
Input Range: 90 ~ 265Vac (RMS), Full Range Input
Frequency: 47 ~ 63Hz
Input Current: 4A (RMS) @115Vac, 2A (RMS) @230Vac
Inrush Current: 50A Max @115Vac, 80A Max @230Vac cold start
Output Characteristics:
Output Voltage: +3.3V, Min. load: 0.3A, Max. load: 16.8A , Load Reg: ¡À5%, Ripple & Noise: 50mV P-P
Output Voltage: +5V, Min. load: 0.3A, Max. load: 12A , Load Reg: ¡À5%, Ripple & Noise: 50mV P-P
Output Voltage: +12V, Min. load: 1.5A, Max. load: 10A , Load Reg: ¡À5%, Ripple & Noise: 120mV P-P
Output Voltage: -12V, Min. load: 0.0A, Max. load: 0.8A , Load Reg: ¡À10%, Ripple & Noise: 120mV P-P
Output Voltage: +5Vsb, Min. load: 0.0A, load: 2.0A, Load Reg: ¡À5%, Ripple & Noise: 50mV P-P
Specification:
Temperature Range: Operating: 0¡ãC ~ +50¡ãC on full load; storage & shipping: -20¡ãC ~ +80¡ãC
Humidity: 5 ~ 95% on operating and storage
Dielectric Withstand: Input to frame ground 1800 VAC for 2 second
Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all outputs
Rise time: Less than 20ms
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25¡ãC
Dimensions (LxWxH): 150x81.5x40.5mm/6x3.2x1.6in

Other Details

MPN:
FSP180-50PLAR

Find Similar Products by Category

Vendors Other Products


View All Products

Product Reviews

-->

This product hasn't received any reviews yet. Be the first to review this product!

Write a review

chat iconOur newsletter

Categories